对应证书:Cisco CCIE-R&S(路由&交换)专家
培训课时:128课时(脱产班15天、周末班16天、晚班30个晚上)
Cisco CCIE-R&S(路由&交换)认证简介
CCIE认证是目前Cisco认证体系中最顶级的证书。其中路由和交换方向的认证内容着重于安全、融合网络、服务质量(QoS)、虚拟专用网(VPN)和宽带技术等主题。为你提供在速变的网络环境中驾驭 Cisco 设备所需的专业知识,获得被视为全球Internetworking 领域中的顶级证书后,你将成为领域中*竞争力的人。路由和交换领域的CCIE认证资格表示网络人士在不同的LAN、WAN接口和各种路由器、交换机的联网方面拥有专家级知识。R&S 领域的专家可以解决复杂的连接问题,利用技术解决方案提高带宽、缩短响应时间、*限度地提高性能、加强安全性和支持全球性应用。考生应当能够安装、配置和维护LAN、WAN和拨号接入服务。
CCIE理论考试(CCIE笔试认证考试号 350-001、考试时间两个半小时)
CCIE实验考试(一天8小时)
取得CCIE认证如无工作经验薪资水平为5000-8000元/月,有工作经验20万/年左右
培训目标:路由器上各种路由协议的高级配置和排错,多层交换机的各种应用,IOS的特性,QOS的实施,基本安全操作。
培训教材:思科中文教材和威特教育自编中文实验指导手册
Cisco CCIE-R&S(路由&交换)课程简介
*门课 CCIE笔试 (路由交换CCIE考试号 350-001)
Ø CCIE认证培训理论指导;BGP原理以及配置;Bridging and Switching;IP IGP Protocols;ISDN;IOS Features;IP Features;Quality of Service;Multicast;Security;Multiservice;IP EGP Protocols;QOS;CBWFQ;CLASS-BASED-CONTROL;IPv6;Voice over IP;Catalyst 3550、3560多层交换机简介;2、3、4层交换机的功能特性
Ø CCIE Written: 讲解 CCIE 笔试相关的考试知识与注意事项
Ø 具备在 CCIE Lab 中解决多种突发问题的能力及通过 CCIE 笔试
第二门课 CCIE Pre-Lab
u 针对 CCIE Lab 考试的相关内容、注意事项及备考方案
u CCIE 认证应试者
u 熟悉 CCIE Lab 考试的相关知识、技能
u CCIE Routing & Switching 认证(各种考试版本强化训练)
Cisco CCIE-R&S(路由&交换)LAB考试要点
1.00 |
Implement Layer 2 Technologies |
√ |
1.10 |
Implement Spanning Tree Protocol (STP) |
|
|
(a) 802.1d |
|
|
(b) 802.1w |
|
|
(c) 801.1s |
|
|
(d) Loop guard |
|
|
(e) Root guard |
|
|
(f) Bridge protocol data unit (BPDU) guard |
|
|
(g) Storm control |
|
|
(h) Unicast flooding |
|
|
(i) Port roles, failure propagation, and loop guard operation |
|
1.20 |
Implement VLAN and VLAN Trunking Protocol (VTP) |
|
1.30 |
Implement trunk and trunk protocols, EtherChannel, and load-balance |
|
1.40 |
Implement Ethernet technologies |
|
|
(a) Speed and duplex |
|
|
(b) Ethernet, Fast Ethernet, and Gigabit Ethernet |
|
|
(c) PPP over Ethernet (PPPoE) |
|
1.50 |
Implement Switched Port Analyzer (SPAN), Remote Switched Port Analyzer (RSPAN), and flow control |
|
1.60 |
Implement Frame Relay |
|
|
(a) Local Management Interface (LMI) |
|
|
(b) Traffic shaping |
|
|
(c) Full mesh |
|
|
(d) Hub and spoke |
|
|
(e) Discard eligible (DE) |
|
1.70 |
Implement High-Level Data Link Control (HDLC) and PPP |
|
2.00 |
Implement IPv4 |
|
2.10 |
Implement IP version 4 (IPv4) addressing, subnetting, and variable-length subnet masking (VLSM) |
|
2.20 |
Implement IPv4 tunneling and Generic Routing Encapsulation (GRE) |
|
2.30 |
Implement IPv4 RIP version 2 (RIPv2) |
|
2.40 |
Implement IPv4 Open Shortest Path First (OSPF) |
|
|
(a) Standard OSPF areas |
|
|
(b) Stub area |
|
|
(c) Totally stubby area |
|
|
(d) Not-so-stubby-area (NSSA) |
|
|
(e) Totally NSSA |
|
|
(f) Link-state advertisement (LSA) types |
|
|
(g) Adjacency on a point-to-point and on a multi-access network |
|
|
(h) OSPF graceful restart |
|
2.50 |
Implement IPv4 Enhanced Interior Gateway Routing Protocol (EIGRP) |
|
|
(a) Best path |
|
|
(b) Loop-free paths |
|
|
(c) EIGRP operations when alternate loop-free paths are available, and when they are not available |
|
|
(d) EIGRP queries |
|
|
(e) Manual summarization and autosummarization |
|
|
(f) EIGRP stubs |
|
2.60 |
Implement IPv4 Border Gateway Protocol (BGP) |
|
|
(a) Next hop |
|
|
(b) Peering |
|
|
(c) Internal Border Gateway Protocol (IBGP) and External Border Gateway Protocol (EBGP) |
|
2.70 |
Implement policy routing |
|
2.80 |
Implement Performance Routing (PfR) and Cisco Optimized Edge Routing (OER) |
|
2.90 |
Implement filtering, route redistribution, summarization, synchronization, attributes, and other advanced features |
|
3.00 |
Implement IPv6 |
|
3.10 |
Implement IP version 6 (IPv6) addressing and different addressing types |
|
3.20 |
Implement IPv6 neighbor discovery |
|
3.30 |
Implement basic IPv6 functionality protocols |
|
3.40 |
Implement tunneling techniques |
|
3.50 |
Implement OSPF version 3 (OSPFv3) |
|
3.60 |
Implement EIGRP version 6 (EIGRPv6) |
|
3.70 |
Implement filtering and route redistribution |
|
4.00 |
Implement MPLS Layer 3 VPNs |
|
4.10 |
Implement Multiprotocol Label Switching (MPLS) |
|
4.20 |
Implement Layer 3 virtual private networks (VPNs) on provider edge (PE), provider (P), and customer edge (CE) routers |
|
4.30 |
Implement virtual routing and forwarding (VRF) and Multi-VRF Customer Edge (VRF-Lite) |
|
5.00 |
Implement IP Multicast |
|
5.10 |
Implement Protocol Independent Multicast (PIM) sparse mode |
|
5.20 |
Implement Multicast Source Discovery Protocol (MSDP) |
|
5.30 |
Implement interdomain multicast routing |
|
5.40 |
Implement PIM Auto-Rendezvous Point (Auto-RP), unicast rendezvous point (RP), and bootstrap router (BSR) |
|
5.50 |
Implement multicast tools, features, and source-specific multicast |
|
5.60 |
Implement IPv6 multicast, PIM, and related multicast protocols, such as Multicast Listener Discovery (MLD) |
|
6.00 |
Implement Network Security |
|
6.01 |
Implement access lists |
|
6.02 |
Implement Zone Based Firewall |
|
6.03 |
Implement Unicast Reverse Path Forwarding (uRPF) |
|
6.04 |
Implement IP Source Guard |
|
6.05 |
Implement authentication, authorization, and accounting (AAA) (configuring the AAA server is not required, only the client-side (IOS) is configured) |
|
6.06 |
Implement Control Plane Policing (CoPP) |
|
6.07 |
Implement Cisco IOS Firewall |
|
6.08 |
Implement Cisco IOS Intrusion Prevention System (IPS) |
|
6.09 |
Implement Secure Shell (SSH) |
|
6.10 |
Implement 802.1x |
|
6.11 |
Implement NAT |
|
6.12 |
Implement routing protocol authentication |
|
6.13 |
Implement device access control |
|
6.14 |
Implement security features |
|
7.00 |
Implement Network Services |
|
7.10 |
Implement Hot Standby Router Protocol (HSRP) |
|
7.20 |
Implement Gateway Load Balancing Protocol (GLBP) |
|
7.30 |
Implement Virtual Router Redundancy Protocol (VRRP) |
|
7.40 |
Implement Network Time Protocol (NTP) |
|
7.50 |
Implement DHCP |
|
7.60 |
Implement Web Cache Communication Protocol (WCCP) |
|
8.00 |
Implement Quality of Service (QoS) |
|
8.10 |
Implement Modular QoS CLI (MQC) |
|
|
(a) Network-Based Application Recognition (NBAR) |
|
|
(b) Class-based weighted fair queuing (CBWFQ), modified deficit round robin (MDRR), and low latency queuing (LLQ) |
|
|
(c) Classification |
|
|
(d) Policing |
|
|
(e) Shaping |
|
|
(f) Marking |
|
|
(g) Weighted random early detection (WRED) and random early detection (RED) |
|
|
(h) Compression |
|
8.20 |
Implement Layer 2 QoS: weighted round robin (WRR), shaped round robin (SRR), and policies |
|
8.30 |
Implement link fragmentation and interleaving (LFI) for Frame Relay |
|
8.40 |
Implement generic traffic shaping |
|
8.50 |
Implement Resource Reservation Protocol (RSVP) |
|
8.60 |
Implement Cisco AutoQoS |
|
9.00 |
Troubleshoot a Network |
|
9.10 |
Troubleshoot complex Layer 2 network issues |
|
9.20 |
Troubleshoot complex Layer 3 network issues |
|
9.30 |
Troubleshoot a network in response to application problems |
|
9.40 |
Troubleshoot network services |
|
9.50 |
Troubleshoot network security |
|
10.00 |
Optimize the Network |
|
10.01 |
Implement syslog and local logging |
|
10.02 |
Implement IP Service Level Agreement SLA |
|
10.03 |
Implement NetFlow |
|
10.04 |
Implement SPAN, RSPAN, and router IP traffic export (RITE) |
|
10.05 |
Implement Simple Network Management Protocol (SNMP) |
|
10.06 |
Implement Cisco IOS Embedded Event Manager (EEM) |
|
10.07 |
Implement Remote Monitoring (RMON) |
|
10.08 |
Implement FTP |
|
10.09 |
Implement TFTP |
|
10.10 |
Implement TFTP server on router |
|
10.11 |
Implement Secure Copy Protocol (SCP) |
|
10.12 |
Implement HTTP and HTTPS |
|
10.13 |
Implement Telnet |
|
Cisco CCIE-R&S(路由&交换)重认证
CCIE认证有效期为两年,且必须在之后每两年进行再认证。要进行再认证,请在认证过期之前通过下列考试之一:
Ø 通过任何一门目前提供的CCIE笔试或CCIE实验考试,或
Ø 通过目前提供的CCDE笔试或目前提供的CCDE实践考试,或
Ø 通过思科认证架构师(CCAr)面试和CCAr委员会审核,延长较低等级认证的有效期
未能在再认证期限之前通过资格考试或实验考试的CCIE和CCDE专业人士,将被置于暂缓状态,他们的雇主也会被告知这一情况。对处于暂缓状态的CCIE和CCDE专业人士,在他们的专家级别认证永久失效之前,将有一年时间来通过需要的考试或实验考试。失效了的CCIE和CCDE专业人士将失去所有相关利益,并且必须再次通过笔试和实验考试。
获取或再认证CCIE、CCDE或CCAr将自动延长您的入门级、工程师、资深工程师、其他专家级别认证或专业化认证的有效期,至*获得的CCIE、CCDE或CCAr认证过期日。
威特教育之——特色
威特教育的Cisco培训在杭州乃至浙江地区占有90%的市场份额。浙大网新、浙大快威、浙江移动、杭州移动、温州移动、吉林移动、浙江爱特、杭州荣志、浙大图灵、浙江烟草、杭州烟草、金华烟草、丽水烟草、萧山国际机场、浙江工商管理局、*民生银行、*银行、杭州银行、交通银行、*开发银行、IBM、惠普、联想、西门子、诺基亚、杭州市海关等*行政*、企业客户以及数以十计的系统集成商和Cisco代理商成为杭州威特教育的企业会员,*杭州威特教育作为Cisco培训提供商。良好的口碑来源于威特教育一贯的对培训质量负责的态度和优质的教学质量的保障。
威特教育之——服务
1、终生不限次数免费重听所报课程,试听制度保障
2、强调动手能力,实战能力,重视理论联系实际
获得Cisco CCIE-R&S(路由&交换)认证的实力保障:
1、完备的实验环境,加强实验环节,切实提高学员的动手能力。
2、资深技术实力的Cisco授权讲师授课,将讲师的一些网络系统的实践经验,与学员进行交流,达到学以至用,学有所成。
3、引进国际*的“技术沙龙式”案例分析教学法,学生与讲师面对面地分析实际案例,从网络故障排查入手,在讲师步步引导下,由学员分析引发故障的诸多可能性,并提出对应的排查对策,最终解决问题,从而切实提高学员的实际分析问题-解决问题的能力
a.具有丰富的专业技术和实践经验
b.长期为客户定制培训、善于联系实际、因材施教
c.和蔼可亲,风趣幽默,善于调动课堂气氛,具有高超的培训技巧和生动活泼的授课风格
d.引进国际*的业界培训理念
备注:
1、 上课期间人手一台计算机,理论与实验相结合,充分提高学员动手能力
2、 课余时间标准实验室长期免费开放,并有讲师专门辅导
3、 教学128课时,个人上机实验不限时